Sierra Flame Lynwood W76 Cast Iron Free Standing Wood Stove - W76

Almost never undersold. If you find a better price email us their quote and we'll likely beat it.

The Sierra Flame Lynwood W76 is a welcome addition for wood burners everywhere, and is what a wood-burning stove should be: efficient, low emissions, and provides great flames with a maximum viewing area.

Versatile, the Lynwood W76 wood-burning stove adapts to any room and will create a cozy atmosphere in any space.
EPA 2020 certified, the Lynwood W76 wood-burning stove brings warmth without compromising on air quality.

FEATURES:
2020 EPA Compliant
78 percent Maximum Efficency
13,784 to 57,674 BTU/hr
Heats up 2000 Square Feet
Maximum Log size – 21"

Type: Solid Fuel Room Heater
Type of Combustion: Non-catalytic
Fuel Type: Dry Cordwood (15% moisture)
Main Material: Cast Iron
Firebox Isolation: Vermiculite
Flue Exit: 6" (150 mm) Back to top connector
Recommended Heating Area: 450 to 2,000 square feet (42 to 185 m2)
Nominal Firebox Volume: 1.55 cubic feet (0.044 m3)
Maximum Burn Time (1): 14 hours
Maximum Heat Output (dry cordwood) (2): 57,700 BTU/h (16.91 kW)
Overall Heat Output Rate (min. to max.) (2) (3): 13,784 BTU/h to 57,684 BTU/h (4.04 kW to 16.91 kW)
Average Overall Efficiency (3): 71% (HHV) 4 76% (LHV) 5
Optimum Efficiency (5): 78%
Average Particulate Emissions Rate (7): 1.81 g/h (EPA/CSA B415.1-10)
Average CO (5): 120 g/h

1 Maximum Burn Time will vary depending on design of home, climate, wood type and operation.
2 Heat Out Range results are determined during specific emissions testestablished by the EPA.
3 As measured per CSA B415. 1-10 stack loss method. The Maximum Heat Output value is representative of a morefrequent re-fueling cycle than specified.
4 Higher Heating Value of the fuel is obtained per CSA B415. 1-10 test method.
5 Lower Heating Value of the fuel is obtained per CSA B415. 1-10 test method.
6 Optimum overall efficiency at a specific burn rate (LHV).
7 This appliance is officially tested and certified by an independent agency. Particulate Emissions rate is obtained using EPA Test Method.
8 Carbon Monoxide Emissions rate results from Test Method CSA B415. 1-10 test method.

Click to see the Sierra Flame Lynwood W76 Wood Stove Brochure

Click to see the Sierra Flame Lynwood W76 Wood Stove Owners Manual

Click to see the Sierra Flame Lynwood W76 Wood Stove Specs

California residents please click on the link for information on Proposition 65 BEFORE purchasing.

Tags: UPC 628451612353