Please sign in so that we can notify you about a reply
Fire Chief FC1100E Indoor Wood and Coal Burning Furnace - FC1100E
Almost never undersold. If you find a better price email us their quote and we'll likely beat it.
Whether burning wood or coal, our largest indoor furnace Heat system, the Fire Chief FC1100, will keep you warm during the coldest winter. Fire Chief Indoor Wood and Coal Burning Furnaces are designed for maximum efficiency with our unique 360° Roller Grates (with a lifetime warranty) and a Secondary Combustion Chamber - each Wood furnace is pre-wired for easy installation, constructed of heavy gauge steel (7 ga & 10 ga) plus cast iron front and rear baffles for strength and Quality Heating System durability.
Comfortably heats up to approximately 5000 square feet*
Made in the USA
Fire Chief Quality Heating System Model FC1100 Wood Furnace
MODEL Specifications: FC1100
Weight: 710 lb approx
Height: 50.5"
Width: 26"
Depth: 39"
Maximum Heating Capacity: 5000 sq ft
Maximum Btu Output: 200,000 approx
Maximum Log Size: 34"
Flue Size: 8"
Fire Chamber Volume: 11.00 cu ft
Plenum Size: 12" Round
Door Size: 13" X 14"
3-Speed Blower Capacity: 1150,1500, 1800 cfm
Warranty - Firebox: 5 Year
Warranty - Grates, Castings: Lifetime
• Quality Heating System Construction - High Grade, heavy (7 & 10) gauge steel is continuously welded for maximum structural strength to make this quality heating system a safe wood furnace.
• Secondary Combustion Chamber - This quality heating system increases fuel efficiency while re-burning smoke and wood gases before they are vented up the chimney.
• Cold Air Return/Filter Box - Standard equipment on the FC1100 Fire Chief Wood Furnace. The box filters the return air as well as allowing a connection for a cold air return duct if necessary.
• Cast Iron Baffle - Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. This quality heating system cast iron baffle comes with a lifetime warranty.
• Cast Iron Roller Grates - Designed to roll 360 degrees from either direction, allowing fine ash to drop into ash pit and leaving hot coals in fire box. This quality heating systems cast iron roller grates includes a lifetime warranty.
• Thermostatically Controlled Draft - Adds convenience with a full range of comfort determined by the temperature setting of your Fire Chief wall thermostat.
• 3-Speed Blower - This quality heating system motor allows for gentle circulation of air when heating requirements are low and high output when heating requirements are high.
• Pre-Wired Electrical System - Fully automatic components are pre-wired for your convenience and to reduce electrical installation time and expense.
Standard Features on the FC1100 Fire Chief Wood Furnace Heating System:
Pre-Wired Electrical System
3-Speed Fan with Speed Control
Cold Air Return and Filter Box
(uses standard 25" X 18" X 1" Filters available at most hardware/home centers)
Optional Accessories for the Fire Chief FC1100 Wood Furnace Heating System:
AM-BD12 - 12" Back Draft Damper
TBS-24 - Hot Water Coil with Hole Saw
Click to see the Fire Chief Indoor Wood And Coal Burning Furnace Brochure
Click to see the Fire Chief Indoor FC1100 Wood And Coal Burning Furnace Owners Manual
*The BTU ranges and heating capacity specifications are provided as guidelines only and in no way guarantee the output or capacity of the unit. The actual BTU output depends on the type of fuel being burned and its condition, the draft adjustment and the chimney that the unit is hooked up to. The actual area that the unit will heat depends on factors such as the conditions of the building, heat loss, type of construction, amount of insulation, type of air movement and location of the unit.
Almost never undersold. If you find a better price email us their quote and we'll likely beat it.
Whether burning wood or coal, our largest indoor furnace Heat system, the Fire Chief FC1100, will keep you warm during the coldest winter. Fire Chief Indoor Wood and Coal Burning Furnaces are designed for maximum efficiency with our unique 360° Roller Grates (with a lifetime warranty) and a Secondary Combustion Chamber - each Wood furnace is pre-wired for easy installation, constructed of heavy gauge steel (7 ga & 10 ga) plus cast iron front and rear baffles for strength and Quality Heating System durability.
Comfortably heats up to approximately 5000 square feet*
Made in the USA
Fire Chief Quality Heating System Model FC1100 Wood Furnace
MODEL Specifications: FC1100
Weight: 710 lb approx
Height: 50.5"
Width: 26"
Depth: 39"
Maximum Heating Capacity: 5000 sq ft
Maximum Btu Output: 200,000 approx
Maximum Log Size: 34"
Flue Size: 8"
Fire Chamber Volume: 11.00 cu ft
Plenum Size: 12" Round
Door Size: 13" X 14"
3-Speed Blower Capacity: 1150,1500, 1800 cfm
Warranty - Firebox: 5 Year
Warranty - Grates, Castings: Lifetime
• Quality Heating System Construction - High Grade, heavy (7 & 10) gauge steel is continuously welded for maximum structural strength to make this quality heating system a safe wood furnace.
• Secondary Combustion Chamber - This quality heating system increases fuel efficiency while re-burning smoke and wood gases before they are vented up the chimney.
• Cold Air Return/Filter Box - Standard equipment on the FC1100 Fire Chief Wood Furnace. The box filters the return air as well as allowing a connection for a cold air return duct if necessary.
• Cast Iron Baffle - Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. This quality heating system cast iron baffle comes with a lifetime warranty.
• Cast Iron Roller Grates - Designed to roll 360 degrees from either direction, allowing fine ash to drop into ash pit and leaving hot coals in fire box. This quality heating systems cast iron roller grates includes a lifetime warranty.
• Thermostatically Controlled Draft - Adds convenience with a full range of comfort determined by the temperature setting of your Fire Chief wall thermostat.
• 3-Speed Blower - This quality heating system motor allows for gentle circulation of air when heating requirements are low and high output when heating requirements are high.
• Pre-Wired Electrical System - Fully automatic components are pre-wired for your convenience and to reduce electrical installation time and expense.
Standard Features on the FC1100 Fire Chief Wood Furnace Heating System:
Pre-Wired Electrical System
3-Speed Fan with Speed Control
Cold Air Return and Filter Box
(uses standard 25" X 18" X 1" Filters available at most hardware/home centers)
Optional Accessories for the Fire Chief FC1100 Wood Furnace Heating System:
AM-BD12 - 12" Back Draft Damper
TBS-24 - Hot Water Coil with Hole Saw
Click to see the Fire Chief Indoor Wood And Coal Burning Furnace Brochure Click to see the Fire Chief Indoor FC1100 Wood And Coal Burning Furnace Owners Manual*The BTU ranges and heating capacity specifications are provided as guidelines only and in no way guarantee the output or capacity of the unit. The actual BTU output depends on the type of fuel being burned and its condition, the draft adjustment and the chimney that the unit is hooked up to. The actual area that the unit will heat depends on factors such as the conditions of the building, heat loss, type of construction, amount of insulation, type of air movement and location of the unit.
Supply chain disruptions have greatly impacted inventory levels in our industry, as well as in many other organizations across the globe. We want to personally acknowledge these shifts in supply levels have affected our ability to surpass your expectations in many situations for prompt delivery of your order. Should you not be able to wait for supply delays, please contact us about stock levels before ordering. As always, we thank you for your business!
