Osburn 2000 Wood Insert with Blower | OB02016

Osburn 2000 Wood Insert with Blower | Model OB02016

The Osburn 2000-I OB02016 is a versatile masonry fireplace insert for households that want familiar wood-stove styling and noticeably better heat delivery from an existing fireplace. A cast iron-framed glass door and classic proportions help it work with both traditional and transitional hearth designs.

Its 2.4-cubic-foot non-catalytic firebox provides room for routine cordwood loading, and a variable-speed blower is included to distribute warm air. Optional wide faceplates, door overlays and finishing trims make it easier to cover surrounding masonry while preserving the intended finished appearance of the fireplace.

When the Osburn 2000-I Is a Practical Choice

For an existing masonry fireplace in a conventional living room, the 2000-I offers a straightforward middle ground between smaller inserts and high-capacity models. Its cast iron-framed door and traditional detailing suit many older hearths, while the 2.4-cubic-foot firebox allows larger fuel loads than the 1700-I. The manufacturer recommends about 500 to 2,100 square feet depending on heat loss and climate. An included blower makes the fireplace upgrade more useful for circulating room heat than an open decorative fire alone.

Compare the 2000-I's insert body and chosen faceplate to your actual masonry dimensions, including depth behind the damper. Optional larger surrounds and finishing trim may help cover older fireplace openings, but they do not make an undersized firebox safe. The unit must be connected to a compatible lined chimney as specified by Osburn. If your home has a small fireplace, compare the 1700-I and Matrix 1900 rather than assuming this mid-size insert will fit.

Why Choose the Osburn 2000 Wood Insert with Blower?

• 2.4 cu. ft. non-catalytic firebox
• Included variable-speed convection blower
• Cast iron-framed glass door
• Optional cuttable faceplate and decorative trim options
• EPA-certified combustion and glass air-wash system

Osburn 2000 Wood Insert with Blower Specifications

• Manufacturer model: OB02016
• Manufacturer-recommended heating area: 500-2,100 sq. ft.
• Fuel: Dry cordwood (manufacturer recommends 16" pieces)
• Maximum heat output using dry cordwood: 75,000 BTU/h
• Tested overall heat output range: 14,200-44,500 BTU/h
• Maximum published burn time: Up to 8 hours
• Overall firebox volume: 2.4 cu. ft.
• EPA test loading volume: 1.95 cu. ft.
• Maximum log length: 20"
• Average overall efficiency (HHV): 72%
• Average overall efficiency (LHV): 77%
• Optimum overall efficiency: 79%
• Average particulate emissions: 2.3 g/h
• Overall dimensions (W x H x D): 28 3/8" x 23 1/8" x 26 3/8"
• Minimum fireplace opening (W x H x D): 28 7/8" x 23 3/8" x 15 3/4"
• Firebox interior dimensions (W x H x D): 21" x 11 7/8" x 16 3/4"
• Viewing glass size (W x H): 17 1/8" x 10 1/4"
• Door construction: Single glass door, cast iron frame
• Shipping weight: 434 lb
• Flue outlet diameter: 6"
• Manufacturer minimum chimney height: 12 ft; verify complete installation requirements
• Blower: Included 144 CFM
• Mobile home approval: No
• Combustion technology: Non-catalytic
• EPA listing: EPA 2020 approved (per manufacturer Specs/Manual)
• Manufacturer warranty: Limited lifetime; see written warranty for terms

Manufacturer figures are reference values, not guaranteed heating results. Maximum BTU output, tested output rates and burn-time estimates use different conditions; real performance depends on fuel quality, chimney draft, climate, home heat loss and operating settings. Confirm all dimensions and listed installation clearances in the current manual before ordering.

Installation and Compatibility

The Osburn 2000-I is intended for an approved masonry fireplace with a compatible liner. Confirm fireplace-opening measurements, 6-inch liner specifications and faceplate coverage from the current installation documents.

Important: Wood-burning inserts must be installed only in a compatible existing masonry fireplace, in accordance with the manufacturer's listing and installation instructions.

Frequently Asked Questions

Is the Osburn 2000-I a good option for an existing open fireplace?

It can be when the existing fireplace is approved masonry construction and the opening, liner and clearances meet Osburn's requirements. It is not a freestanding stove or an unlisted zero-clearance conversion.

How is it different from the Inspire 2000-I?

Both use a 2.4-cubic-foot firebox, but the 2000-I emphasizes classic door styling, while the Inspire 2000-I has a more minimalist front and different surround choices.

Is a fan included?

Yes. Osburn specifies a 144 CFM blower on the 2000-I. Check any desired faceplate and overlay upgrades independently.

Osburn Manuals and PDF Resources

• Osburn 2000 Insert Owner's Manual (PDF)

Questions about fireplace fit, venting or compatible accessories? Contact WoodStovePro at info@woodstovepro.com or 888-418-0005 before placing your order.

California residents: Review Proposition 65 information before purchasing.

Tags: Osburn 2000 Wood Insert | OB02016, OBO2016, OB 02016, Osburn OB02016, Osburn 2000-I