Fire Chief FC500E Indoor Wood and Coal Burning Furnace - FC500E

Almost never undersold. If you find a better price email us their quote and we'll likely beat it.

Put an end to your worries and keep warm this winter and for many winters to come with one of our FC500 Fire Chief Wood and Coal Burning Furnaces. Designed for maximum efficiency with our unique 360 degree Cast Iron Roller Grates (with a lifetime warranty) and a Secondary Combustion Chamber - constructed of heavy gauge steel (7 ga & 10 ga) plus cast iron front and rear baffles for strength and durability - each wood furnace is pre-wired for ease of installation. Use as a central indoor, add-on or supplemental heat source.
Comfortably heats approximately 1500 - 2000 square feet*
Made in the USA

add on MODEL Specifications FC500
Weight: 525 lb approx
Height: 50.5"
Width: 26"
Depth: 26"
Maximum Heating Capacity: 1500 - 2000 sq ft
Maximum Btu Output: 100,000 approx
Maximum Log Size: 22"
Flue Size: 6"
Fire Chamber Volume: 5.00 cu ft
Plenum Size: 12" Round
Door Size: 13" X 14"
3-Speed Blower Capacity: 1150,1500, 1800 cfm
Warranty - Firebox: 5 Year
Warranty - Grates, Castings: Lifetime

- Construction - High Grade, heavy (7 & 10) gauge steel is continuously welded for maximum structural strength.
- Secondary Combustion Chamber - This Inside add on wood furnace Increases fuel efficiency while re-burning smoke and wood gases before they are vented up the chimney.
- Cold Air Return/Filter Box - Standard equipment on the FC500 Indoor Fire Chief wood Furnace. The box filters the return air as well as allowing a connection for a cold air return duct if necessary.
- Cast Iron Baffle - Directs the combustion air flow above and below the cast iron grates creating the maximum fire temperature for every pound of fuel. Comes with a lifetime warranty.
- Cast Iron Roller Grates - Designed to roll 360 degrees from either direction, allowing fine ash to drop into ash pit and leaving hot coals in fire box. Comes with a lifetime warranty.
- Thermostatically Controlled Draft - Adds convenience with a full range of comfort determined by the temperature setting of your Fire Chief wall thermostat.
- 3-Speed Blower - This motor allows for gentle circulation of air when heating requirements are low and maximum output when needed.
- Pre-Wired Electrical System - Fully automatic components are pre-wired for your convenience and will reduce electrical installation time and expense.

Standard Features on the FC500 Inside Fire Chief add on Wood Furnace:
Pre-Wired Electrical System
3-Speed Blower with Speed Control
Cold Air Return and Filter Box
(uses standard 25" X 18" X 1" Filters - available from most hardware/home centers)

Optional Accessories for the FC500 Fire Chief Furnace:
AM-BD12 - 12" Back Draft Damper
TBS-24 - Hot Water Coil with Hole Saw

Click to see the Fire Chief Indoor Wood And Coal Burning Furnace Brochure

Click to see the Fire Chief Indoor FC500 Wood And Coal Burning Furnace Owners Manual

*The BTU ranges and heating capacity specifications are provided as guidelines only and in no way guarantee the output or capacity of the unit. The actual BTU output depends on the type of fuel being burned and its condition, the draft adjustment and the chimney that the unit is hooked up to. The actual area that the unit will heat depends on factors such as the condition of the building, heat loss, type of construction, amount of insulation, type of air movement and location of the unit.