Reset
Reset
Manufacturer

DuraVent DuraLiner 6

Explore 6 inch chimney liner and relining accessories in the DuraVent DuraLiner product line for your next purchase, replacement, or installation project. Chimney liners help adapt or renew an approved existing chimney flue, but liner size and materials must be chosen for the appliance and chimney conditions.

For a dependable match, check correct series, 6 inch nominal size, listed appliance application, fitting type, and mounting or termination requirements. The DuraVent DuraLiner label identifies a particular product family. Nominal size alone does not establish compatibility with other brands or other venting designs.

How to choose 6 inch DuraVent DuraLiner

For 6 inch chimney liner and relining accessories in the DuraVent DuraLiner product line, correct selection begins with the job the product needs to perform. Chimney liners help adapt or renew an approved existing chimney flue, but liner size and materials must be chosen for the appliance and chimney conditions.

Appliance and vent system

Stove connector, factory-built chimney sections, and liners used in an existing chimney are not substitutes for one another. This group is organized around 6 inch. Check whether the number refers to a single nominal vent diameter or, in concentric designs, a pair of passages; actual dimensions can vary by series. The DuraVent DuraLiner family is a useful way to narrow the search, but its joint style and approved accessories still need to match.

What to compare before ordering

  • Confirm the appliance manufacturer, model, fuel, and approved vent category or vent family.
  • Measure the existing chimney and compare DuraVent DuraLiner 6 inch liner size, insulation, alloy or construction, and listed fittings.
  • Review elbows, tees, supports, wall or roof penetrations, clearances, and termination instructions.
  • Check whether any transition or substitute component is explicitly authorized by the manufacturer.

Venting layout and safety checks

A complete system may need more than a straight pipe section. Depending on the approved installation, review support hardware, turns, flashing, firestops, adaptors, cleaning access, and the appropriate termination. The permitted route and clearance to combustibles come from the appliance and vent manufacturer, not the category label. Check liner rating, nominal size, length, insulation, and listed support or cap. Determine where the system transitions from connector or liner to its listed chimney/termination arrangement, and account for structural support.

Is DuraVent DuraLiner 6 inch a substitute for new factory-built chimney pipe?

A liner is intended for a compatible existing chimney and does not automatically replace listed factory-built chimney sections. Verify chimney condition, liner application, insulation and the appliance manual.

Use the individual listings below for current product details, and confirm the installation manual before final selection.