Reset
Manufacturer

DuraVent DVL 5

Explore 5 inch double-wall stove connector pipe in the DuraVent DVL product line for your next purchase, replacement, or installation project. DVL double-wall stovepipe is a connector product for approved wood-stove installations inside the room rather than a through-wall insulated chimney.

For a dependable match, check correct series, 5 inch nominal size, listed appliance application, fitting type, and mounting or termination requirements. The DuraVent DVL label identifies a particular product family. Nominal size alone does not establish compatibility with other brands or other venting designs.

How to choose 5 inch DuraVent DVL

For 5 inch double-wall stove connector pipe in the DuraVent DVL product line, correct selection begins with the job the product needs to perform. DVL double-wall stovepipe is a connector product for approved wood-stove installations inside the room rather than a through-wall insulated chimney.

Appliance and vent system

Stove connector, factory-built chimney sections, and liners used in an existing chimney are not substitutes for one another. This group is organized around 5 inch. Check whether the number refers to a single nominal vent diameter or, in concentric designs, a pair of passages; actual dimensions can vary by series. The DuraVent DVL family is a useful way to narrow the search, but its joint style and approved accessories still need to match.

Venting layout and safety checks

A complete system may need more than a straight pipe section. Depending on the approved installation, review support hardware, turns, flashing, firestops, adaptors, cleaning access, and the appropriate termination. The permitted route and clearance to combustibles come from the appliance and vent manufacturer, not the category label. Confirm the connector series, diameter, clearance requirements, and transition to a listed chimney. Determine where the system transitions from connector or liner to its listed chimney/termination arrangement, and account for structural support.

What to compare before ordering

  • Confirm the appliance manufacturer, model, fuel, and approved vent category or vent family.
  • Review DuraVent DVL 5 inch connector joints, appliance outlet size, interior run, clearances, and chimney transition.
  • Review elbows, tees, supports, wall or roof penetrations, clearances, and termination instructions.
  • Check whether any transition or substitute component is explicitly authorized by the manufacturer.

Can DuraVent DVL 5 inch pass through a combustible wall or ceiling?

Stove connector pipe is not a replacement for a listed chimney system at penetrations. Verify the manufacturer-required chimney transition, support components, and clearances.

Use the individual listings below for current product details, and confirm the installation manual before final selection.