Reset
Manufacturer

Selkirk Direct-Temp 5x8

Explore 5 x 8 inch direct-vent gas appliance pipe in the Selkirk Direct-Temp product line for your next purchase, replacement, or installation project. Direct-Temp is a manufacturer-specific direct-vent component family for approved gas appliances.

For a dependable match, check correct series, 5 x 8 inch nominal size, listed appliance application, fitting type, and mounting or termination requirements. The Selkirk Direct-Temp label identifies a particular product family. Nominal size alone does not establish compatibility with other brands or other venting designs.

Comparing 5 x 8 inch Selkirk Direct-Temp

For 5 x 8 inch direct-vent gas appliance pipe in the Selkirk Direct-Temp product line, correct selection begins with the job the product needs to perform. Direct-Temp is a manufacturer-specific direct-vent component family for approved gas appliances.

Appliance and vent system

Type B gas vent, direct-vent assemblies, condensing-appliance polymer vents, and gasketed special gas vent are intended for different applications. This group is organized around 5 x 8 inch. Check whether the number refers to a single nominal vent diameter or, in concentric designs, a pair of passages; actual dimensions can vary by series. The Selkirk Direct-Temp family is a useful way to narrow the search, but its joint style and approved accessories still need to match.

A practical compatibility checklist

  • Confirm the appliance manufacturer, model, fuel, and approved vent category or vent family.
  • Verify the full concentric dimension pair, elbow orientation, appliance-approved caps, and listed vent connections.
  • Review elbows, tees, supports, wall or roof penetrations, clearances, and termination instructions.
  • Check whether any transition or substitute component is explicitly authorized by the manufacturer.

Venting layout and safety checks

A complete system may need more than a straight pipe section. Depending on the approved installation, review support hardware, turns, flashing, firestops, adaptors, cleaning access, and the appropriate termination. The permitted route and clearance to combustibles come from the appliance and vent manufacturer, not the category label. Match both combustion-air and exhaust passage dimensions where applicable, along with the connection style and termination. If the installation uses a pressure-tight or condensing exhaust system, verify all joint sealing and condensate-handling requirements in its installation guide.

How do I confirm the right direct-vent size for Selkirk Direct-Temp 5 x 8 inch?

A direct-vent designation may reference both exhaust and combustion-air passages. Compare the appliance vent chart and exact system series; do not assume similarly named nominal sizes share the same outer diameter or connections.

Use the individual listings below for current product details, and confirm the installation manual before final selection. Gas exhaust venting and fuel-supply piping are different product systems.