DuraVent Type B Gas Vent 28
Explore 28 inch Type B gas vent pipe and fittings in the DuraVent Type B Gas Vent product line for your next purchase, replacement, or installation project. Listed Type B vent carries flue gases from appliances specifically approved for Type B venting; it is not interchangeable with a sealed direct-vent or condensing exhaust system.
For a dependable match, check correct series, 28 inch nominal size, listed appliance application, fitting type, and mounting or termination requirements. The DuraVent Type B Gas Vent label identifies a particular product family. Nominal size alone does not establish compatibility with other brands or other venting designs.
Planning around 28 inch DuraVent Type B Gas Vent
For 28 inch Type B gas vent pipe and fittings in the DuraVent Type B Gas Vent product line, correct selection begins with the job the product needs to perform. Listed Type B vent carries flue gases from appliances specifically approved for Type B venting; it is not interchangeable with a sealed direct-vent or condensing exhaust system.
Specifications worth checking
- Confirm the appliance manufacturer, model, fuel, and approved vent category or vent family.
- Compare DuraVent Type B Gas Vent 28 inch Type B joints, diameter, supports, approved gas appliance, and termination.
- Review elbows, tees, supports, wall or roof penetrations, clearances, and termination instructions.
- Check whether any transition or substitute component is explicitly authorized by the manufacturer.
Appliance and vent system
Type B gas vent, direct-vent assemblies, condensing-appliance polymer vents, and gasketed special gas vent are intended for different applications. This group is organized around 28 inch. Check whether the number refers to a single nominal vent diameter or, in concentric designs, a pair of passages; actual dimensions can vary by series. The DuraVent Type B Gas Vent family is a useful way to narrow the search, but its joint style and approved accessories still need to match.
Venting layout and safety checks
A complete system may need more than a straight pipe section. Depending on the approved installation, review support hardware, turns, flashing, firestops, adaptors, cleaning access, and the appropriate termination. The permitted route and clearance to combustibles come from the appliance and vent manufacturer, not the category label. Confirm the appliance vent category, listed manufacturer system, joint type, vent diameter, and clearance requirements. If the installation uses a pressure-tight or condensing exhaust system, verify all joint sealing and condensate-handling requirements in its installation guide.
Can DuraVent Type B Gas Vent 28 inch replace direct-vent gas fireplace pipe?
Not on the basis of diameter. Type B gas vent and direct-vent assemblies are different listed systems with different appliance applications. Use only the vent family named by the appliance installation instructions.
Use the individual listings below for current product details, and confirm the installation manual before final selection. Gas exhaust venting and fuel-supply piping are different product systems.




