Product filters

Manufacturer

5 x 8 inch

$120.02
Selkirk 5x8 Direct-Temp Attic Insulation Shield - 5DT-AIS The attic insulation shield is required to guard against the hazard of blown in or blanket...
+

$163.00
Selkirk 5x8 Direct-Temp Cathedral Support Box - 5DT-CSS Used to support Direct-Temp pipe when installing in a cathedral or pitched ceiling. CCS comes with...
+

$96.57
Selkirk 5x8 Direct-Temp Ceiling Support - 5DT-CS Used as support on vertical applications when penetrating flat ceilings or floors. NOTE: Add (B) to end...
+

$19.51
Selkirk 5x8 Direct-Temp Firestop Spacer - 5DT-FS Required when penetrating combustible materials. Refer to our installation instructions for specific...
+

$151.37
Selkirk 5x8 Direct-Temp High Wind Vertical Cap - 5DT-VC Lead time on all Selkirk product is 5 working days plus ship time. Most pipe will deliver within...
+

$118.74
Selkirk 5x8 Direct-Temp Low Profile Siding Shield - Square Termination - 5DT-VS-1 1/8" Larger Inner Diameter Opening for easier installation Lead time on...
+

$26.75
Selkirk 5x8 Direct-Temp Offset Support - 5DT-OS Supports Direct-Temp pipe when using offsets or as a re-support on vertical runs that need additional...
+

$54.29
Selkirk 5x8 Direct-Temp Round Trim Plate - 5DT-TPR Used to provide a finished look at the ceiling or wall for vertical or horizontal installations Lead...
+

$708.45
Selkirk 5x8 Direct-Temp Snorkel Termination 14" - 5DT-ST14 Use when horizontal termination is too close to grade or additional height is needed. Lead...
+

$812.79
Selkirk 5x8 Direct-Temp Snorkel Termination 36" - 5DT-ST36 Use when horizontal termination is too close to grade or additional height is needed. Lead...
+

$54.29
Selkirk 5x8 Direct-Temp Square Trim Plate - 5DT-TPS Used to provide a finished look at the ceiling or wall for vertical or horizontal installations Lead...
+

$96.57
Selkirk 5x8 Direct-Temp Trim Plate - 5DT-TP Used to provide a finished look at the ceiling for vertical installations. NOTE: Add (B) to end of Part # to...
+

$138.98
Selkirk 5x8 Direct-Temp Vertical Termination - 1605800 - 5DT-VT Lead time on all Selkirk product is 5 working days plus ship time. Most pipe will...
+

$120.98
Selkirk 5x8 Direct-Temp Vinyl Siding Standoff - 5DT-VS Used as a heat shield for vinyl siding when terminating horizontally. Lead time on all Selkirk...
+

$34.52
Selkirk 5x8 Direct-Temp Wall Support Band - 5DT-WS/B Used as a support along the wall to provide stability and one-inch clearance. NOTE: Add (B) to end...
+

$91.21
Selkirk 5x8 Direct-Temp Wall Thimble - 5DT-WT-1 Two-piece wall thimble easily slides together for installation on varying wall thicknesses. Serves a dual...
+

$355.42
Selkirk Direct-Temp Universal Rubber Boot Flashing Kit - URBAK Used for installations on corrugated roofs flat to 12/12 pitch to seal where Direct-Temp...
+

$1,499.00
Napoleon Venting - 10ft Vent Kit, 5/8" - Bulk Pack of 7 - SKU: GD430-BULK If you have some questions about Napoleon Venting, please call or e-mail us at:...
+

$189.00
Napoleon Venting - 12" Straight Pipe, 5/8" (4 pack) - SKU: 5D12-BULK If you have some questions about Napoleon Venting, please call or e-mail us at:...
+

$239.00
Napoleon Venting - 24" Straight Pipe, 5/8" (4 pack) - SKU: 5D24-BULK If you have some questions about Napoleon Venting, please call or e-mail us at:...
+

$329.00
Napoleon Venting - 36" Straight Pipe, 5/8" (4 pack) - SKU: 5D36-BULK If you have some questions about Napoleon Venting, please call or e-mail us at:...
+

$419.00
Napoleon Venting - 48" Straight Pipe, 5/8" (4 pack) - SKU: 5D48-BULK If you have some questions about Napoleon Venting, please call or e-mail us at:...
+

$40.00
Napoleon Venting - 5'' Coupler - SKU: W175-0166 If you have some questions about Napoleon Venting, please call or e-mail us at: info@woodstovepro.com...
+

$85.00
Napoleon Venting - 5/8 Coupler Kit - SKU: W175-0196 If you have some questions about Napoleon Venting, please call or e-mail us at: info@woodstovepro.com...
+