Selkirk Chimney Pipe, Stove Pipe and Venting Products

Selkirk is one of the most recognized names in chimney, stove pipe, and venting products for residential, commercial, and light commercial applications. For generations, homeowners, installers, and hearth professionals have trusted Selkirk for chimney systems, vent pipe, gas vent, pellet vent, direct vent, chimney liners, caps, supports, adapters, and related venting accessories.

At WoodstovePro, we carry Selkirk products for wood stoves, fireplaces, pellet appliances, gas appliances, furnaces, water heaters, and chimney relining projects. Whether you are replacing a damaged chimney component, building a new venting system, matching an existing Selkirk installation, or trying to identify the correct pipe series, our team can help you find the right product before you order.

Need help choosing the right Selkirk chimney or venting part? E-mail or call us at 888-418-0005.

Selkirk Chimney and Venting

Selkirk manufactures chimney and venting products used throughout North America for hearth, HVAC, and appliance venting applications. The Selkirk product family includes all-fuel chimney systems, Type B gas vent, stainless steel liners, stovepipe, direct vent pipe, pellet vent, medium-efficiency venting, high-efficiency venting, caps, supports, flashing, elbows, adapters, and installation accessories.

Because chimney and venting parts must match the appliance, fuel type, pipe series, diameter, clearance requirements, and installation instructions, it is important to choose the correct Selkirk system. A stove pipe connector is not the same as insulated chimney pipe, and Type B gas vent is not interchangeable with direct vent, pellet vent, or all-fuel chimney.

WoodstovePro can help you identify the right Selkirk product for your installation, replacement, or repair.

Selkirk All-Fuel Chimney Systems

Selkirk all-fuel chimney systems are used with approved appliances such as wood stoves, fireplaces, oil appliances, gas appliances, and other listed residential heating equipment when the appliance and installation instructions allow that system.

Popular Selkirk all-fuel chimney product lines include Ultra-Temp, Sure-Temp, SuperVent, and related chimney components. These systems are commonly used when a properly listed insulated chimney is required above the stove pipe connector, through walls, through ceilings, through attics, and above the roofline.

Selkirk all-fuel chimney products may include:

Insulated chimney pipe lengths
Elbows and offsets
Tee kits and wall supports
Ceiling support boxes
Attic insulation shields
Wall thimbles
Roof supports
Flashing and storm collars
Chimney caps and spark arresters
Adapters and transition components

If you are replacing an existing Selkirk chimney part, the pipe series and diameter must be matched carefully. Similar-looking parts from different chimney systems may not connect correctly or may not be listed for use together.

Selkirk Ultra-Temp Chimney Pipe

Selkirk Ultra-Temp is a factory-built insulated chimney system used for approved residential all-fuel applications and select larger custom chimney projects. It is one of Selkirk's best-known chimney product lines and is often used for wood stove and fireplace installations that require listed chimney pipe.

Ultra-Temp chimney components are commonly selected for installations that require a durable insulated chimney system, secure connections, support components, roof termination parts, and accessories designed to work together as a complete system.

WoodstovePro carries Selkirk Ultra-Temp chimney pipe and related parts, including pipe lengths, elbows, tee kits, supports, flashing, storm collars, caps, adapters, and installation accessories.

Selkirk SuperVent Chimney Pipe

Selkirk SuperVent is another popular all-fuel chimney system used for approved residential hearth applications. It is often chosen by homeowners and installers who need insulated chimney pipe for wood stoves, fireplaces, and other compatible appliances.

SuperVent components may include chimney pipe lengths, elbows, support boxes, wall thimbles, tee kits, flashing, caps, and related installation parts. As with any chimney system, SuperVent parts should be matched by brand, series, diameter, and installation requirements.

If you are not sure whether you have Selkirk SuperVent, Ultra-Temp, Sure-Temp, or another chimney system, call WoodstovePro before ordering.

Selkirk Stove Pipe

Selkirk stove pipe is used as the connector pipe between an approved appliance and the proper chimney system. Stove pipe is typically used in the same room as the appliance and should not be treated as a substitute for insulated chimney pipe.

Depending on the installation, a wood stove or similar appliance may require single-wall or double-wall stove pipe before transitioning to an approved chimney system. The correct choice depends on the appliance manual, clearance requirements, room layout, chimney location, and local code.

WoodstovePro can help you choose the correct Selkirk stove pipe length, elbow, adapter, damper section, trim collar, or connector component for your setup.

Selkirk Type B Gas Vent

Selkirk Type B gas vent is designed for approved Category I gas-fired appliances where the appliance manual and local code allow Type B venting. This can include certain gas furnaces, water heaters, boilers, heaters, and gas appliances.

Selkirk Type B gas vent products include round and oval venting options, along with caps, elbows, tees, supports, firestops, flashing, adapters, and other system components. Selkirk Model RV is commonly associated with smaller residential Type B gas vent applications, while larger Model R venting is used for larger residential, multi-family, commercial, and industrial applications.

Type B gas vent should only be used where it is approved for the appliance. It should not be used as wood stove chimney pipe, pellet vent, direct vent, or special gas vent unless the appliance instructions specifically allow that product.

Selkirk Pellet Vent and Type L Vent

Selkirk pellet vent products are designed for approved pellet-burning appliances and other applications specified by the manufacturer. Selkirk Model VP and related pellet vent systems are available in common pellet appliance diameters and include pipe lengths, elbows, tees, cleanouts, adapters, wall thimbles, supports, caps, and termination components.

Pellet vent systems must be selected according to the appliance manual and installation requirements. The correct diameter, clearances, termination location, and outside air requirements should be confirmed before ordering.

WoodstovePro can help you find Selkirk pellet vent pipe, Type L vent components, adapters, tee kits, wall pass-through parts, and replacement fittings for your pellet stove installation.

Selkirk Direct Vent Products

Selkirk Direct-Temp direct vent products are used with approved direct vent gas appliances. Direct vent systems are appliance-specific, which means the fireplace, stove, or heater manual must list or approve the venting system being used.

Direct vent pipe is different from Type B gas vent, pellet vent, stove pipe, and all-fuel chimney pipe. It is commonly used with direct vent gas fireplaces and stoves that bring combustion air in from outdoors and exhaust flue gases through a sealed venting system.

Before ordering Selkirk direct vent parts, confirm the appliance brand, model number, approved venting system, pipe size, and termination requirements.

Selkirk Chimney Liners

Selkirk chimney liners are used for approved chimney relining applications, including certain masonry chimney upgrades, fireplace insert installations, and appliance venting projects. Selkirk liner options include stainless steel flexible liners, stainless steel rigid liners, and aluminum liner products for approved gas applications.

A chimney liner may be needed when an existing masonry chimney is oversized, damaged, improperly matched to the appliance, or being adapted for a new approved appliance. The correct liner depends on the fuel type, appliance, chimney condition, flue size, height, insulation requirements, and local code.

WoodstovePro can help you identify Selkirk liner kits, liner sections, top plates, caps, adapters, insulation wrap, and related chimney relining components.

Selkirk Caps, Supports, Flashing, and Accessories

A complete chimney or venting installation usually requires more than pipe. Selkirk manufactures the supporting components needed to complete many approved systems, including caps, roof flashing, storm collars, wall supports, ceiling supports, attic insulation shields, firestops, elbows, tees, adapters, wall thimbles, roof braces, and termination parts.

These parts must be matched to the correct Selkirk system and pipe diameter. Ordering by measurement alone can lead to the wrong component, especially when different Selkirk product families look similar but use different connections.

If you are replacing a cap, elbow, support, tee, or adapter from an existing system, try to locate the pipe series, diameter, appliance model, and any part numbers before calling.

Not Sure Which Selkirk Product You Need?

Choosing the right chimney or venting product is important for safety, performance, and code compliance. Selkirk product lines are not universally interchangeable, and the correct part depends on the appliance and the venting system already in place.

WoodstovePro can help you determine:

Whether you need stove pipe, chimney pipe, pellet vent, direct vent, Type B gas vent, or chimney liner
Which Selkirk pipe series matches your existing installation
The correct diameter, length, elbow, tee, support, flashing, cap, or adapter
Whether your appliance manual allows the venting system you are considering
Whether you need a replacement component or a complete system
Which parts are commonly ordered together for a proper installation

Frequently Asked Questions

What does Selkirk make?

Selkirk makes chimney and venting products, including all-fuel chimney systems, stove pipe, Type B gas vent, direct vent pipe, pellet vent, chimney liners, caps, supports, flashing, elbows, adapters, and other venting accessories.

Is Selkirk chimney pipe the same as stove pipe?

No. Stove pipe is typically used as connector pipe between the appliance and the chimney system in the same room as the appliance. Insulated chimney pipe is used where the venting system passes through walls, ceilings, attics, rooflines, and other areas that require listed chimney components. Always follow the appliance manual and Selkirk installation instructions.

Can I mix Selkirk chimney parts with another brand?

Do not assume chimney or venting parts are interchangeable. Parts must match the correct brand, product series, diameter, listing, appliance requirements, and installation instructions. Contact WoodstovePro before ordering if you are trying to match an existing system.

What is Selkirk Ultra-Temp used for?

Selkirk Ultra-Temp is an insulated all-fuel chimney system used with approved residential appliances and select larger chimney projects. It is commonly used in wood stove, fireplace, and other listed appliance installations that require approved chimney pipe.

What is Selkirk Type B gas vent used for?

Selkirk Type B gas vent is used with approved Category I gas appliances when the appliance manual and local code allow Type B venting. It is not a substitute for wood stove chimney pipe, direct vent, pellet vent, or all-fuel chimney.

Does Selkirk make pellet stove venting?

Yes. Selkirk makes pellet vent and Type L vent products for approved pellet-burning appliances. The correct parts depend on the appliance manual, vent diameter, installation layout, clearances, and termination requirements.

Who can help me choose the right Selkirk part?

Call WoodstovePro at 888-418-0005 and ask for Sean, our Master Hearth Technician. He can help you identify the correct Selkirk chimney pipe, stove pipe, Type B gas vent, pellet vent, direct vent, liner, cap, support, elbow, tee, adapter, or accessory for your installation.